Free Golden Ratio Face Calculator

Use a front-facing photo to compare five facial ratios with the golden ratio, 1.618. Check the measurements, adjust any misplaced points and see what research says about facial proportions and beauty. Your photo stays in your browser.

Choose a photo for your golden ratio face test

One adult. Front-facing. No beauty filter.

See an example result
Your photo stays in this browser.Privacy policy

Example result · sample values

How to read your golden ratio face result

In this example, the face measures 588 px from the upper forehead to the chin and 432 px across the cheekbones. Divide 588 by 432 and you get 1.36, which is 16% below 1.618.

We calculate the other four ratios the same way. A ratio 10% above 1.618 counts the same as one 10% below it. The five percentage differences average 10.9%, giving a golden ratio match of 100% − 10.9% ≈ 89%.

Try it with your photo
Golden ratio match89%
Face length ÷ face width
1.36

588 px ÷ 432 px · 16% below 1.618

Eye span ÷ mouth width
1.87

352 px ÷ 188 px · 16% above 1.618

Mouth width ÷ nose width
1.52

188 px ÷ 124 px · 6% below 1.618

Nose-to-chin ÷ lips-to-chin
1.55

212 px ÷ 137 px · 4% below 1.618

Lower lip ÷ upper lip
1.42

34 px ÷ 24 px · 12% below 1.618

Each scale runs from 0.80 to 2.40. The vertical line marks 1.618; the dot shows the measured ratio.

These are sample values, not measurements of a real person.

How to test your face against the golden ratio

  1. 01

    Choose a front-facing photo

    Use a clear, front-facing photo taken at eye level from at least an arm’s length away. Keep your lips gently closed, your expression relaxed and your hair off your forehead.

  2. 02

    Check the 14 points

    Check the blue points on your forehead, cheekbones, eye corners, nose, lips and chin. Drag any misplaced point, or use Tab and the arrow keys. Move the top point to your hairline if you want to measure from there.

  3. 03

    Compare each ratio with 1.618

    Select a ratio to highlight its two measurements on your photo and see how far it is from 1.618. The overall match percentage combines all five ratios. Download a result card to save your measurements.

What is the golden ratio, and how does it apply to faces?

The golden ratio, written as φ (phi), is approximately 1.618. Two lengths are in the golden ratio when the longer one is about 1.618 times the shorter one. A golden ratio face test divides one facial measurement by another, then compares the result with 1.618. There’s no standard set of measurements for these tests. This calculator uses the five ratios below and shows you where each measurement starts and ends.

φ = (1 + √5) ÷ 2 ≈ 1.618

The five ratios this golden ratio face calculator measures
RatioHow it’s measured
Face length ÷ face widthDistance from the upper forehead (or hairline) to the bottom of the chin ÷ width across the cheekbones
Eye span ÷ mouth widthDistance between the outer corners of the two eyes ÷ distance between the corners of the mouth
Mouth width ÷ nose widthDistance between the corners of the mouth ÷ width across the outer edges of the nostrils
Nose-to-chin ÷ lips-to-chinDistance from the base of the nose to the bottom of the chin ÷ distance from where the lips meet to the bottom of the chin
Lower lip ÷ upper lipHeight of the lower lip ÷ height of the upper lip, measured at the center with the lips closed
  1. Locate the measurement points

    We use MediaPipe Face Landmarker to place 14 points on your photo. It runs in your browser, and you can move any point that looks misplaced.

  2. Measure the lengths

    Each ratio divides one straight-line length by another, measured in pixels. Mouth width appears in two ratios, and the point where the lips meet is shared by the lower-face and lip ratios.

  3. Compare each ratio with 1.618

    For each ratio, we work out how far it is from 1.618 as a percentage of 1.618. A ratio of 1.45 is about 10% below; 1.78 is about 10% above.

  4. Calculate the overall match

    We take the average of the five percentage differences, counting differences above and below 1.618 equally, then subtract it from 100%. We limit the result to 0–100% and round it to a whole number. All five ratios must be measurable for a match percentage to appear.

Golden ratio match = 100 × (1 − average of |ratio − φ| ÷ φ)
Limited to 0–100, rounded and shown as a percentage. Calculations use the full value of φ.

How to calculate the golden ratio of your face by hand

Open a front-facing photo in an image editor and zoom in. Measure the two lengths in a pair as straight lines, in pixels, and divide the first by the second. Then subtract 1.618, ignore the sign, and divide by 1.618 to get the difference as a fraction. For example, a mouth 152 px wide and a nose 100 px wide give 1.52, and (1.618 − 1.52) ÷ 1.618 ≈ 0.06, or 6%.

A measuring tape held against your face follows the curves of your skin, so its measurements can differ from straight lines in a photo. Use the same method when comparing results.

This is a 2D photo estimate and hasn’t been clinically validated. TryPSL’s PSL score doesn’t include golden-ratio readings. Methodology and limitations

What is a good golden ratio face score?

A higher match percentage means your five ratios are closer to 1.618 on average. Because we round the percentage, a 100% match doesn’t mean every ratio equals φ exactly. There’s no established “good” score that reliably predicts attractiveness. The individual results show which ratios are above or below 1.618.

Below 1.618

1.618

The first measurement is less than 1.618 times the second. In the example shown here, the blue bar is 1.30 times as long as the grey bar.

Close to 1.618

1.618

The ratio between the two measurements is close to 1.618. Moving a point slightly can change the result by a few percent, so check the points before reading too much into small differences.

Above 1.618

1.618

The first measurement is more than 1.618 times the second. At 1.95, the blue bar is almost twice as long as the grey bar.

The diagrams show ratios of 1.30, 1.618 and 1.95. The grey bar stays the same length. The dashed line shows how long the blue bar would be at a ratio of 1.618.

Does the golden ratio make a face attractive?

Research has not established 1.618 as a universal standard of facial beauty. Some studies have found links between particular proportions and attractiveness ratings, but they used different measurements and groups of faces. None of the studies below tested this calculator’s overall match percentage as a measure of attractiveness.

  • A critique of Marquardt’s mask

    Holland, Aesthetic Plastic Surgery (2008)

    Stephen Marquardt’s “phi mask” is a facial template based on golden-ratio proportions. This paper challenged the method used to assess how well faces fit the mask. It found that the mask most closely resembled white female fashion models with more masculine facial proportions, and questioned its use as an ideal even for white women.

  • Preferred proportions matched an average face

    Pallett, Link & Lee, Vision Research (2010)

    In four experiments using photos of white women, participants preferred an eye-to-mouth distance of about 36% of face length and a distance between the pupils of about 46% of face width. These proportions matched those of an average face in the study; they weren’t based on 1.618.

  • Golden proportions explained little of the variation in ratings

    Kiekens et al., American Journal of Orthodontics and Dentofacial Orthopedics (2008)

    In this study, 76 adults rated photos of 64 white adolescents. For four of the 19 proportions tested, being closer to the golden ratio was significantly associated with higher ratings. Together, those four proportions explained 16% of the variation in ratings, which the authors considered too little to be clinically useful.

  • A systematic review found no clear link to attractiveness ratings

    Londono et al., Journal of Prosthetic Dentistry (2024)

    This review found no significant association between golden-ratio proportions and facial attractiveness ratings across the ethnic groups studied. It also reported that facial height proportions didn’t follow the golden ratio. Other results suggested that some facial proportions do match it, so the findings were mixed.

Why TryPSL’s PSL score doesn’t use the golden ratio

The evidence doesn’t establish 1.618 as a universal target for facial proportions. Our PSL scale test uses reference proportions, and we explain how each measurement is scored. Golden-ratio comparisons are available separately in this calculator. You can also measure your midface ratio, FWHR or canthal tilt with our other free tools.

Why golden ratio face calculators give different results

Two golden ratio face tests can give different scores for the same photo. They may use different measurements, place the points differently or calculate their scores using different formulas. Check these four things before comparing results.

Ways golden ratio face calculators differ
What variesCommon choicesEffect
Ratios measuredFace length to width, mouth width to nose width, or ratios of distances between the eyes, nose, lips and chinUsing a different set of ratios changes the average, even for the same photo.
Starting point for face lengthThe hairline, the upper forehead or the brow lineIn our example, moving the top point up by 60 px changes face length ÷ width from 1.36 to 1.50.
Order of divisionLonger ÷ shorter (about 1.618) or shorter ÷ longer (about 0.618)Reversing the division gives the reciprocal. Check which value the tool uses for comparison.
Scoring formulaAn average difference, a weighted score, a comparison with the Marquardt mask or an undisclosed formulaScores from different tools can’t be compared directly.

The detector places the top point on the upper forehead. To measure from your hairline, drag the point there yourself. Your result card will show that the points were manually adjusted.

Why your golden ratio result changes between photos

The five ratios use different widths and heights. Camera position, expression and point placement can change them even when your face hasn’t changed.

Camera distance

Hold the camera at least an arm’s length away, or use a timer. Close selfies make the nose look wider, which lowers mouth ÷ nose width.

Expression

Keep your lips gently closed and your face relaxed. Smiling widens the mouth, and parting your lips moves the line where they meet.

Head angle

Face the lens with the camera at eye level. Turning your head narrows the widths; tilting it up or down changes the face and lower-face lengths.

Hair and lighting

Move hair away from your forehead and cheekbones, and use even lighting. Hair and shadows can cause the detector to misplace points along the edges of your face.

Camera distance matters because features closer to the lens appear larger. A 2018 study in JAMA Facial Plastic Surgery modeled this effect. At 30 cm (12 in), the nose appeared about 30% wider relative to the face than it would without perspective distortion. At 1.5 m (5 ft), the difference was small.

Golden ratio face calculator FAQs

What does the golden ratio mean for faces?

It refers to the idea that faces look more attractive when certain facial measurements form a ratio close to 1.618. Common comparisons include face length to width, mouth width to nose width and the relative heights of the lower and upper lips. It’s a popular idea, but it isn’t an established standard of beauty.

How do you calculate the golden ratio of your face?

Measure two lengths in a front-facing photo using the same units, then divide the first by the second: mouth width ÷ nose width, for example. Keep that order even if the result is below 1. If the mouth is 152 px wide and the nose is 100 px wide, the ratio is 1.52, about 6% below 1.618. This calculator compares five such ratios with 1.618.

What is a good golden ratio face score?

There’s no validated cutoff for a “good” score. We calculate the average percentage difference between the five ratios and 1.618, then subtract it from 100%. The result is limited to 0–100% and rounded to a whole number. It describes how closely the ratios match 1.618; we haven’t validated it against human ratings of attractiveness.

Does the golden ratio make a face more attractive?

Research hasn’t established it as a general rule. A 2010 study using photos of white women found that the preferred spacing of the eyes and mouth matched average facial proportions in its sample. In a 2008 study of adolescents, some proportions closer to 1.618 were linked to higher attractiveness ratings. However, they explained too little of the variation in ratings for the authors to consider them clinically useful.

What is the Marquardt mask?

It’s a facial template based on golden-ratio proportions, developed by surgeon Stephen Marquardt and often presented as a model of the ideal face. A 2008 paper in Aesthetic Plastic Surgery found that it most closely resembled white female fashion models with more masculine facial proportions. The paper questioned its use as an ideal even for white women. This calculator doesn’t use the mask.

Is the golden ratio different for men and women?

No. The golden ratio is a mathematical constant, approximately 1.618. This tool compares the same five facial ratios with it for everyone and doesn’t use separate male and female targets.

Why do golden ratio face calculators give different scores?

They may use different measurements, choose different starting points for face length or combine the ratios differently. Measuring from the hairline to the chin, for example, gives a different length than starting at the upper forehead. TryPSL shows each ratio, the points used to measure it and the formula for the overall match percentage.

Does the PSL score use the golden ratio?

No. TryPSL’s PSL score compares measurements with reference proportions and doesn’t include golden-ratio readings. This calculator lets you explore that comparison separately.

How accurate is this golden ratio calculator?

We haven’t established an error margin. The result depends on head angle, camera distance, expression and point placement. Short lengths, such as upper lip height, can change by several percent if a point moves a few pixels.

Why does my result change between photos?

Camera distance changes how wide your nose looks relative to your mouth and face. Smiling widens the mouth, parting your lips moves the lip line, and tilting your head up or down changes vertical lengths. Use the same setup and a relaxed expression when comparing photos.

Can I move the points?

Yes. Drag any blue point, or select it with Tab and move it with the arrow keys. Hold Shift for larger steps. Select “Reset points” to restore the original positions. Your result and downloaded card use your latest adjustments.

Can you change your face’s golden ratio?

A different photo can give a different result even when your face hasn’t changed. Pose, expression and point placement all matter. This tool can’t confirm a change in facial structure, and it doesn’t recommend treatments.

Is the golden ratio face calculator free and private?

Yes. You can measure and download your result without an account or payment. Your photo and measurements stay in your browser and aren’t sent to our analysis server. Select “Clear & choose another” or reload the page to clear them.